Internet

We have plenty of functionalities in our ONT (Router) like Parental controls, Port Forwarding or even the ability to setup a Guest Wi-Fi.
Feel free to Log into the ONT and take a look.

Category: Internet

The WPS feature allows you to connect devices to the Wireless network without using the Passcode. This feature is benificial for Printers and TVs where it is harder to enter the password.
To activate this feature press the ‘WPS’ button on the router until the light flashes green, then press the ‘WPS’ button or follow the prompts on the device you are trying to connect. This should connect your devices to the wireless network.

Category: Internet

There are multiple factors that will affect your wireless signal

1. Transmitting through objects – The material those objects are made out of will determine how much it impacts the wireless speed. Metal and concrete are the hardest for wireless signals to pass through, while wood, drywall and insulation are not as bad, but can still affect the signal.
2. Saturation of the Wi-Fi signal – Saturation occurs when there are numerous wireless routers surrounding your location.
3. Older Devices – The router will lower the signal quality to accommodate an older device, affecting all other devices on the network.
4. Device Location – If the router is having problems connecting to a device that is farther away, it will affect the communication to all other devices.

Category: Internet

Power
Solid Green – Active and working
Flashing Green – booting up / getting update from Lakeland servern

Broadband
Solid Green – Connected to Lakeland Networks
Solid Red or off – Contact Lakeland Networks for Support

Service
Flashing Green – Connected to Internet (flashes as data flows through the service)
Solid Red or off – Contact Lakeland Networks for Supportn

WiFi 2.4 GHz / WiFi 5 GHz
Solid Green – Wi-Fi is active with no devices connected to it
Flashes Green – Devices are connected and data is flowing through the Wi-Fi
Off – Wi-Fi has been turned off

Ethernet 1-4
Flashing Green – When a device is connected to that port on the ONT and data is flowing through it

Phone 1 or 2
Flashing Green – Indicates that that there is a voicemail when no one is on the phone, or will flash if there is someone on the phone.

Category: Internet

There are multiple factors that will affect your Internet speed

1. Connection to the Router – Depending if your device is wireless or connected through a wired Ethernet (Cat5e or higher) cable, your speeds could be different.
2. The age of the device, the operating system and the browser that the device is using can all affect the speed of the service.
3. Other devices connecting to the Internet can affect the speed of the service

IMPORTANT: We recommend using newer devices to reach maximum Internet speeds. If you use older devices on your home network, not only will they not be able to reach maximum speeds, but they can also slow down your whole network.

Category: Internet

Click here for more

Phone

We have plenty of functionalities in our ONT (Router) like Parental controls, Port Forwarding or even the ability to setup a Guest Wi-Fi.
Feel free to Log into the ONT and take a look.

Category: Internet

The WPS feature allows you to connect devices to the Wireless network without using the Passcode. This feature is benificial for Printers and TVs where it is harder to enter the password.
To activate this feature press the ‘WPS’ button on the router until the light flashes green, then press the ‘WPS’ button or follow the prompts on the device you are trying to connect. This should connect your devices to the wireless network.

Category: Internet

There are multiple factors that will affect your wireless signal

1. Transmitting through objects – The material those objects are made out of will determine how much it impacts the wireless speed. Metal and concrete are the hardest for wireless signals to pass through, while wood, drywall and insulation are not as bad, but can still affect the signal.
2. Saturation of the Wi-Fi signal – Saturation occurs when there are numerous wireless routers surrounding your location.
3. Older Devices – The router will lower the signal quality to accommodate an older device, affecting all other devices on the network.
4. Device Location – If the router is having problems connecting to a device that is farther away, it will affect the communication to all other devices.

Category: Internet

Power
Solid Green – Active and working
Flashing Green – booting up / getting update from Lakeland servern

Broadband
Solid Green – Connected to Lakeland Networks
Solid Red or off – Contact Lakeland Networks for Support

Service
Flashing Green – Connected to Internet (flashes as data flows through the service)
Solid Red or off – Contact Lakeland Networks for Supportn

WiFi 2.4 GHz / WiFi 5 GHz
Solid Green – Wi-Fi is active with no devices connected to it
Flashes Green – Devices are connected and data is flowing through the Wi-Fi
Off – Wi-Fi has been turned off

Ethernet 1-4
Flashing Green – When a device is connected to that port on the ONT and data is flowing through it

Phone 1 or 2
Flashing Green – Indicates that that there is a voicemail when no one is on the phone, or will flash if there is someone on the phone.

Category: Internet

There are multiple factors that will affect your Internet speed

1. Connection to the Router – Depending if your device is wireless or connected through a wired Ethernet (Cat5e or higher) cable, your speeds could be different.
2. The age of the device, the operating system and the browser that the device is using can all affect the speed of the service.
3. Other devices connecting to the Internet can affect the speed of the service

IMPORTANT: We recommend using newer devices to reach maximum Internet speeds. If you use older devices on your home network, not only will they not be able to reach maximum speeds, but they can also slow down your whole network.

Category: Internet

Click here for more

Television

We have plenty of functionalities in our ONT (Router) like Parental controls, Port Forwarding or even the ability to setup a Guest Wi-Fi.
Feel free to Log into the ONT and take a look.

Category: Internet

The WPS feature allows you to connect devices to the Wireless network without using the Passcode. This feature is benificial for Printers and TVs where it is harder to enter the password.
To activate this feature press the ‘WPS’ button on the router until the light flashes green, then press the ‘WPS’ button or follow the prompts on the device you are trying to connect. This should connect your devices to the wireless network.

Category: Internet

There are multiple factors that will affect your wireless signal

1. Transmitting through objects – The material those objects are made out of will determine how much it impacts the wireless speed. Metal and concrete are the hardest for wireless signals to pass through, while wood, drywall and insulation are not as bad, but can still affect the signal.
2. Saturation of the Wi-Fi signal – Saturation occurs when there are numerous wireless routers surrounding your location.
3. Older Devices – The router will lower the signal quality to accommodate an older device, affecting all other devices on the network.
4. Device Location – If the router is having problems connecting to a device that is farther away, it will affect the communication to all other devices.

Category: Internet

Power
Solid Green – Active and working
Flashing Green – booting up / getting update from Lakeland servern

Broadband
Solid Green – Connected to Lakeland Networks
Solid Red or off – Contact Lakeland Networks for Support

Service
Flashing Green – Connected to Internet (flashes as data flows through the service)
Solid Red or off – Contact Lakeland Networks for Supportn

WiFi 2.4 GHz / WiFi 5 GHz
Solid Green – Wi-Fi is active with no devices connected to it
Flashes Green – Devices are connected and data is flowing through the Wi-Fi
Off – Wi-Fi has been turned off

Ethernet 1-4
Flashing Green – When a device is connected to that port on the ONT and data is flowing through it

Phone 1 or 2
Flashing Green – Indicates that that there is a voicemail when no one is on the phone, or will flash if there is someone on the phone.

Category: Internet

There are multiple factors that will affect your Internet speed

1. Connection to the Router – Depending if your device is wireless or connected through a wired Ethernet (Cat5e or higher) cable, your speeds could be different.
2. The age of the device, the operating system and the browser that the device is using can all affect the speed of the service.
3. Other devices connecting to the Internet can affect the speed of the service

IMPORTANT: We recommend using newer devices to reach maximum Internet speeds. If you use older devices on your home network, not only will they not be able to reach maximum speeds, but they can also slow down your whole network.

Category: Internet

Click here for more

Billing

We have plenty of functionalities in our ONT (Router) like Parental controls, Port Forwarding or even the ability to setup a Guest Wi-Fi.
Feel free to Log into the ONT and take a look.

Category: Internet

The WPS feature allows you to connect devices to the Wireless network without using the Passcode. This feature is benificial for Printers and TVs where it is harder to enter the password.
To activate this feature press the ‘WPS’ button on the router until the light flashes green, then press the ‘WPS’ button or follow the prompts on the device you are trying to connect. This should connect your devices to the wireless network.

Category: Internet

There are multiple factors that will affect your wireless signal

1. Transmitting through objects – The material those objects are made out of will determine how much it impacts the wireless speed. Metal and concrete are the hardest for wireless signals to pass through, while wood, drywall and insulation are not as bad, but can still affect the signal.
2. Saturation of the Wi-Fi signal – Saturation occurs when there are numerous wireless routers surrounding your location.
3. Older Devices – The router will lower the signal quality to accommodate an older device, affecting all other devices on the network.
4. Device Location – If the router is having problems connecting to a device that is farther away, it will affect the communication to all other devices.

Category: Internet

Power
Solid Green – Active and working
Flashing Green – booting up / getting update from Lakeland servern

Broadband
Solid Green – Connected to Lakeland Networks
Solid Red or off – Contact Lakeland Networks for Support

Service
Flashing Green – Connected to Internet (flashes as data flows through the service)
Solid Red or off – Contact Lakeland Networks for Supportn

WiFi 2.4 GHz / WiFi 5 GHz
Solid Green – Wi-Fi is active with no devices connected to it
Flashes Green – Devices are connected and data is flowing through the Wi-Fi
Off – Wi-Fi has been turned off

Ethernet 1-4
Flashing Green – When a device is connected to that port on the ONT and data is flowing through it

Phone 1 or 2
Flashing Green – Indicates that that there is a voicemail when no one is on the phone, or will flash if there is someone on the phone.

Category: Internet

There are multiple factors that will affect your Internet speed

1. Connection to the Router – Depending if your device is wireless or connected through a wired Ethernet (Cat5e or higher) cable, your speeds could be different.
2. The age of the device, the operating system and the browser that the device is using can all affect the speed of the service.
3. Other devices connecting to the Internet can affect the speed of the service

IMPORTANT: We recommend using newer devices to reach maximum Internet speeds. If you use older devices on your home network, not only will they not be able to reach maximum speeds, but they can also slow down your whole network.

Category: Internet

Click here for more

If you do not find an answer feel free to contact us CLICK HERE